ELO Pay Point Plus Scanner Repair
1. To activate Presentation Mode on the Elo 2D scanner do the following:
a. Use a ballpoint pen or other small device to press the manual scan button that is located on top of the scanner.
b. Press and hold the manual scan button while scanning the below barcode.
c. The 2D barcode scanner should now be in Presentation Mode
The user may also install Honeywell’s EZConfig software to configure the scanner. If the scanner appears to be unresponsive, then we recommend using EZConfig to setup the scanner. If the scanner is not recognized by EZConfig, then the issue is likely hardware related; in that case, we would recommend RMA. “
