Description

APC/Schneider Electric Rack PDU 2G PN AP8853

Name: APC/Schneider Electric Rack PDU 2G PN AP8853
Brand: APC/Schneider Electric
SKU: AP8853
Availability: InStock

APC NetShelter Metered Rack PDU, 0U, 1 phase, 7.4kW 230V 32A, 36 C13 and 6 C19 outlets, IEC 309 2P+E cord

APC/Schneider Electric Rack PDU 2G PN AP8853 offer resilient power distribution and actively measure, display, and log volts, amps, real power (kW) & energy (kWh). This PDU offers LCD display, real-time remote monitoring and user-defined alarms to help prevent circuit overloads that can cause accidental power loss to critical equipment. Historical reporting enables users to meter customer power usage, optimize energy use as well as plan for capacity . This zeroU PDU can operate at up to 60 degrees Celsius and can be accessed, configured, and managed remotely via EcoStruxure IT, Web, SNMP and Command Line Interface. Power is supplied to the PDU at 220-240 volts via IEC 309 2P + E plug with a 3m (10 ft) cord while power comes out at 230 volts through (36) C13 and (6) C19 locking outlets. It integrates with EcoStruxure IT, and daisy-chaining is supported to monitoring up to 4 PDUs from 1 IP address as well as a local USB port for easy local firmware updates. As a Green Premium product, this unit comes with a verified product environment profile, including carbon footprint, scope 3 emissions and end of life instructions.

Specifications

Overview
Presentation	APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. The output and input connections are (36) C13 & (6) C19, and the cable length is 3m. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower the total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra-low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
Lead time	Usually in Stock

Main
Colour	Black
Product or component type	PDU
PDU type	Metered
Cord length	2.9 m
Number of cables	1
Provided equipment	Installation guide Rack mounting brackets Serial configuration cable Safety guide

Complementary
Input Voltage	200 V 208 V 230 V
Height	1791 mm
Width	56 mm
Output Voltage	230 V
Depth	44 mm
Net weight	6.93 kg
Mounting location	Side
Mounting preference	No preference
Input Plug Type	IEC 60309 32 A 2P + E
Mounting mode	Rack-mounted
Rack units	0U
USB compatible	No
Mounting position	Vertical
Permissible voltage	220…240 V
Max line current	32 A
Input current limits	32 A
Load capacity	7400 VA
Network frequency	50/60 Hz
Outlet type and quantity	36 IEC 60320 C13 6 IEC 60320 C19

Environment
Product certifications	VDE
Standards	IEC 60950
Ambient air temperature for operation	-5…60 °C
Relative humidity	5…95 %
Operating altitude	0…10000 ft
Ambient air temperature for storage	-25…65 °C
Storage Relative Humidity	5…95 %
Storage altitude	0…15240 m

Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	200.000 cm
Package 1 Width	16.200 cm
Package 1 Length	10.700 cm
Package 1 Weight	9.200 kg
Unit Type of Package 2	PAL
Number of Units in Package 2	10
Package 2 Height	52.000 cm
Package 2 Width	144.000 cm
Package 2 Length	222.000 cm
Package 2 Weight	157.000 kg

Contractual warranty
Warranty	2 years repair or replace

Specs

Videos

Additional information

Weight	19 lbs
Dimensions	79 × 6.06 × 4.06 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

APC/Schneider Electric Rack PDU 2G PN AP8853